TRU-ETCH ETCHING MACHINE

The Tru-Etch etching machine will etch all types of metal including copper, steel, and brass.  The Tru-Etch is an inexpensive high precision etching machine.  Fully automatic, just set the dial for depth desired and the times shuts it off.

SPECIFICATIONS

Standard Model "PVC" Machine - with a work rack of 11" high x 14" wide; Size: height 14", width 15", length 20".  The etching tank is made from welded PVC material with a clear top and side to be able to observe the activity.  The machine is supplied complete with 1/4 HP motor, electric timer, heating pad and controller, hydrometer, and 6 foot extension cord, all wired for easy use.  Standard electric power required is 100 volts 60 Hz, or 220 volts 50 Hz. is available for foreign countries as an option at an extra cost with a transformer, but with out the required male plug.

Large Model "PVC" Machine - 11" high x 24" wide; Size: height 14", width 25", length 20".  For the etching of large plates, or the etching of a large quantity of plates, this size is recommended.  Exactly similar in all other respects to the Standard Machine except for the width of the tank.

Accessories - These accessories come at no charge with the machine (other than a machine ordered with no electrics)  is a heating pad for under the machine and its controller, a hydrometer, a mechanical timer that controls the electric power to the machine, technical assistance.